Recycling; Guarantee And Service; Troubleshooting - Philips Avent SCF358/00 Mode D'emploi

ENGLISH
16

Recycling

This symbol means that this product shall not be disposed of with normal
household waste (2012/19/EU).
Follow your country's rules for the separate collection of electrical and
electronic products. Correct disposal helps prevent negative consequences
for the environment and human health.

Guarantee and service

If you need information or if you have problems, please visit the Philips website
at www. philips. com / avent or contact the Philips Customer Care Center in your
country (refer to the enclosed worldwide guarantee leaflet for details). If there is no
Customer Care Center in your country, go to your local Philips dealer.

Troubleshooting

This chapter summarizes the most common problems you could encounter with
the appliance. If you are unable to resolve the problem with the information below,
contact the Consumer Care Center in your country.
Problem After switching on the bottle warmer, the entire progress indicator
blinks fast and switches off.
• The temperature of water in the bottle warmer is too hot or too
Cause
cold.
• The boil-dry protection is activated.
• Switch off and unplug. Let it cool down for a few minutes. Make
Solution
sure you fill it with fresh room temperature water.
• The bottle warmer automatically switches off if it is on and there
is no water or not enough water in it. Switch off and unplug. Let
it cool down first. Make sure you fill it with enough fresh room
temperature water. The bottle warmer is ready to use again.
Problem The milk is too hot.
• You may have selected an incorrect setting or are using a milk bag.
Cause
• Select the milk volume setting based on the milk volume, not the
Solution
bottle size.
• If you are using a milk bag, select the keep warm / defrost setting.