Operating Instructions; Preset Operation; Rgb Fade Operation; Auto Operation - Chauvet DJ Obey 4 Manuel D'utilisation

4. O
PERATING

Preset Operation

Sound will not function in Preset Mode.

RGB Fade Operation

Please be sure that the Strobe & Blackout functions are not overriding the controls.
Sound will function in RGB Fade Mode.

Auto Operation

Please be sure that the Strobe & Blackout functions are not overriding the controls.
The fixtures in this mode will not be the same color. Each fixture will operate on a random
Sound will function in Auto Mode.

4. Operating Instructions

I
NSTRUCTIONS
Please note: the white/amber fader works independently of the current operating mode. Only
blackout will effect on this channel.
This controller has preset colors. There are nine preset colors to choose from, which may be
accessed using the nine preset buttons. Please see the instructions below for this operation.
1. Select one or more <FIXTURES>.
2. Press <PRESET> until the appropriate LED indicator lights.
3. Adjust the <FADE TIME> to the desired level to set the Fade Time.
4. Adjust the <MASTER DIMMER> to the desired level to set the intensity.
5. <WHITE DIMMER> may be adjusted; however, it will not be affected by this mode.
6. Select one of the nine
Please be sure that the Strobe or Blackout functions are not overriding the controls.
This controller has a preset color fading program, which will fade all units in unison between colors.
Please see the instructions below for this operation.
1. Select one or more <FIXTURES>.
2. Press <RGB FADE> until the appropriate LED indicator lights.
3. Adjust the <SPEED TIME> to the desired level to set the speed time.
4. Adjust the <FADE TIME> to the desired level to set the fade time.
5. Adjust the <MASTER DIMMER> to the desired level to set the intensity.
6. <WHITE DIMMER> may be adjusted; however, it will not be affected by this mode.
This controller has built-in automatic programs, which will change each unit independently, between
random colors. Please see the instructions below for this operation.
1. Select one or more <FIXTURES>.
2. Press <AUTO> until the appropriate LED indicator lights.
3. Adjust the <SPEED TIME> to the desired level to set the speed time.
4. Adjust the <FADE TIME> to the desired level to set the fade time.
5. Adjust the <MASTER DIMMER> to the desired level to set the intensity.
6. <WHITE DIMMER> may be adjusted; however, it will not be affected by this mode.
color.
PRESET COLOR> buttons.
<
10