Color Macro Operation; Sound-Override; White (Or Amber) - Chauvet DJ Obey 4 Manuel D'utilisation

Color Macro Operation

This mode applies the same color to all fixtures.
Sound will NOT function in Color Macro Mode.

Sound-Override

White (or Amber)

4. Operating Instructions
This controller has preset color macros, some with different intensities. Please see the
instructions below for this operation.
1. Select one or more <FIXTURES>.
2. Press <COLOR MACRO> until the appropriate LED indicator lights.
3. Move the <SPEED TIME> fader to select the color.
4. Adjust the <FADE TIME> to the desired level to set the fade time.
5. Adjust the <MASTER DIMMER> to the desired level to set the intensity.
6. Adjust the <WHITE DIMMER> to the desired level to set the white intensity.
The modes in this controller that have multiple steps are normally triggered using the <SPEED
TIME> fader. However, they can be triggered using the built-in microphone, as well.
Sound-Override mode will ONLY work in one of the following modes:
·
RGB Fade
·
AUTO
·
CHASES
Please see the following steps for operation.
1. Press <SOUND> until the LED indicator lights.
2. Adjust the sound sensitivity by rotating the <MICROPHONE SENSITIVITY
ADJUSTMENT KNOB>.
The <WHITE DIMMER> fader on this controller operates entirely on its own, regardless of the
active operating mode.
The only functions that effect the White (or amber) color are <BLACKOUT> and <STROBE>.
12