Technical Specifications - LEM Aspimed 1.8 Manuel D'utilisation

Supply voltage: 230V ~ 50Hz 150VA
Adjustable void level: 0 ÷ –0,85 bar (85 kPa)
Air supply: 15 l/min.
Size: 196 x 357 x 185 (H) mm
Weight: 2,5 kg
Noise: 54 dBA
Class of risk according to the 93/42/EEC directive: Ila
Operation conditions: Temperature min. 0 °C max 40 °C - Air humidity: min. 10% max 95%
Preservation conditions: Temperature min. –25 °C max 70 °C - Air humidity: min. 10% max 95%
Operation/preservation atmospheric pressure: min. 690 hPa max 1060 hPa
BF-Type device
It is compulsory to carefully read the instructions before using this device
Class II device
Main switch on
Main switch off
AC
Do not use this device in the bathtub or in the shower
Single use
2
Safety fuse
Operation cycle: continuous use
Protection category: IP20
Compliant with the 93/42/EEC Directive
Reference standards applied: EN 10079 -1, EN 60601-1, EN 60601-1-2
GB

TECHNICAL SPECIFICATIONS

Piston electric-compressor, with thermal protection
Single pump version: low flow, high vacuum device
Fuse: T1,6A – 250V