V4 Component-In; V2 Component-In; Closed Caption - JVC I'Art AV-36F802 Manuel D'instructions

V4 Component-In (AV-36F802, AV-32F802 & AV-27F802) /
V2 Component-In (AV-36F702, AV-32F702 & AV-27F702)
Get the best quality video from your DVD player by using this setting and the DVD inputs at the
rear of the television. Set either to YES for component input (for DVD) or to NO for composite
video input (for a regular VCR).
Press the M
To V4 COMPONENT-IN (or V2 COMPONENT-IN for models AV-36F702, AV-32F702
and AV-27F702)

V4 COMPONENT-IN

To turn the input ON or OFF
E when finished
XIT
• This option should be used with DVD players only. For information on connecting VCR's see
page 11. For more information on connecting a DVD player, see page 14.
• AV-36F702, AV-32F702 & AV-27F702 note: These models do not have Input 4.

Closed Caption

Many broadcasts now include an onscreen display of dialog called Closed Captions. Some
broadcasts may also include displays of additional information in text form. Your television can
access and display this information using the Closed Caption feature. To activate the Closed
Caption feature, follow the steps below.
Press the M
To CLOSED CAPTION
To operate
MODE
CAPTION : CC1 CC2 CC3 CC4
TEXT
To select CAPTION (for Closed Captions), TEXT (for text display), or OFF
(for no display)
To move to CAPTION or TEXT
To select a caption (CC1 to CC4) or text channel (T1 to T4)
To accept that selection and move to FINISH
To save settings and exit
NOTE:
• Closed Caption subtitles are usually found on closed caption channel CC1. Some programs
may include additional text information which is usually found on text channel T1. The other
channels are available for future use.
• Closed captioning may not work correctly if the signal being received is weak or if you are
playing a video tape.
• Most broadcasts containing Closed Captioning will display a notice at the start of the
program.
button
ENU
YES
button
ENU
: CAPTION
: T1 T2 T3
FINISH
General Items
NO
T4
39