Divx(R) Deactivation; Network; Network Settings; Wired Network - Samsung BD-C5500 Manuel D'utilisation

Setup

DivX(R) Deactivation

Select this to get a new registration code.
Settings
Display Initial Settings
Audio
System Audio

Network

Subtitle
Do you want to deactivate your device?
Language
Security
Yes
General
Support
NOTE
▪
This function can be operated when DivX(R)
Registration function is deactivated.
Network
To begin setting up the network connection for
your product, follow these steps:
1.
In the Home menu, press the ◄► buttons
to select the Settings, and then press the
ENTER button.
2. Press the ▲▼ buttons to select Network, and
then press the ENTER button.
3. Press the ▲▼ buttons to select Network
Settings, and then press the ENTER button.
4. Press the ▲▼ buttons to select Network
Type, and then press the ENTER button.
5. Press the ▲▼ buttons to select Wired or
Wireless, and then press the ENTER button.
6.
Go to the next section.

Network Settings

Please contact your ISP to find out if your IP
address is static or dynamic. If it is dynamic, we
recommend using the Auto setting. This is the
easiest and will work in the majority of cases. If it is
static, you must use the manual set up procedure.
Directions for wired networks are below. Directions
for wireless networks are after the directions for
wired networks.

English
:
:
No

Wired Network

1.
In the Network Settings menu, press the ▲▼
buttons to select Network Setting, and then
press the ENTER button.
The Internet Protocol Setup screen appears.
2. Press the ► button, then select Auto or
Manual, and then press the ENTER button.
Setting Up a Wired Connection - Auto
1. If you selected Auto, the Network Function
acquires and fills in the values for IP Address,
Subnet Mask, etc., automatically.
NOTE
▪
This process can take up to five minutes.
Settings
Network Setting
Display
Internet Protocol Setup : Auto
Audio
IP Address
System
Subnet Mask
Network
Gateway
Language
DNS
Security
DNS Server
General
Support
> Move
2.
After the Network Function has acquired the
network values, press the RETURN button.
Then, run a Network Test to ensure the product
has connected to your network (See page 39).
3.
If the Network Function does not acquire the
network values or you selected Manual, go to
the directions for Manual Setup.
\
: 0 0 0 0
: 0 0 0 0
: 0 0 0 0
: Auto
: 0 0 0 0
" Select ' Return