Ventilation System - X-lite X-403GT Sécurité Et Instructions D'utilisation

VENTILATION SYSTEM

The ventilation system of the X-403 GT helmet consists of:
Upper air intake:
to the top area of the rider's head without any dispersion. See Fig. 21 for how to open
and close it.
Chin guard air intake:
ging and formation of condensation. See Fig. 26 for how to open and close it.
Rear Extractors:
out, ensuring optimum comfort inside the helmet (Fig. 27).
N-COM - NOLAN COMMUNICATION SYSTEM PRE-SETTING
Your X-Lite helmet is factory-preset to be equipped with the N-Com communication
system.
During communication system installation (see the specific instructions contained in
the N-Com kit), it will be necessary to remove the foam material fillers located in the
polystyrene cheek pads next to the N-Com earphones seats.
WARNING
The above-mentioned fillers should only be removed if the helmet is used with
-
an installed N-Com compatible system.
the air coming from the upper air intake is channelled and directed
conveys air in the mouth and visor area to reduce visor fog-
are integrated in a rear spoiler and allow warm and stale air to flow
24