Manual Preset Tuning; Selecting Preset Stations - Yamaha MCR-940 Mode D'emploi

Manual preset tuning

You can store up to 30 stations.
MEMORY
1
Tune into a radio station you want to preset.
See page 26 for tuning instructions.
2
Press MEMORY.
The PRESET indicator flashes on the front panel
display for about 5 seconds.
3
Press PRESET u / d repeatedly to select a
preset station number while the PRESET
indicator is flashing.
4
Press MEMORY to store while the PRESET
indicator is flashing.
The PRESET indicator lights up on the front panel
display.
5
Repeat steps 1 to 4 until all desired stations
are preset.

Selecting preset stations

You can tune into any desired station simply by selecting
the preset station under which it was stored (☞p.26).
PRESET u / d
Press PRESET u / d repeatedly to select a
preset station.
y
• You can also use the front panel to select preset stations. Press
PRESET u / d repeatedly to select a preset station.
• When you press PRESET u / d on the front panel of the
receiver in standby mode, the receiver automatically activates
the tuner and tunes in to the preset station that you selected
previously.
■ To delete the preset station
1
2
3
To cancel deleting operation
Press OPTION.
OPTION
Press TUNER to set the unit to FM mode.
Press OPTION to display the option menu.
Press / to select "PRESET DEL" and
press ENTER.
Press / to select the preset number you
want to delete and press ENTER.
The preset station is now deleted.
You can continue to delete preset stations on this
screen. Repeat steps 2 and 3 until all unnecessary
stations are deleted.
FM TUNING
TUNER
PRESET u / d
27
En