Lindy 70408 Manuel Utilisateur page 3

User Manual
70408 – Digital to Analogue Audio Converter
Introduction
Thank you for purchasing the LINDY Digital to analogue audio converter. This converter allows you to
input digital audio through a coaxial or optical port and output analogue audio through left and right
phono ports.
Both optical and coaxial cables can be connected at the same time and a simple switch determines
which signal is active.
Specification

Input ports: 1 x TOSLink (Optical Fibre) & 1 x Coaxial

Output ports: 2 x Phono (Left & Right)

Integrated digital interpolator filter and Digital to Analogue Converter (DAC)

Supports uncompressed digital stereo audio input

Power Supply: 5VDC 1A

Dimensions: (WxDxH) 46 x 46 x 24mm

Housing: Plastic

Colour: White
70409 – Analogue to Digital Audio Converter
Introduction
Thank you for purchasing the LINDY analogue to digital audio converter. This converter allows you to
input analogue audio through left and right phono ports and output digital audio through Coaxial/optical
ports.
The digital audio output signal is a 2-channel uncompressed LPCM (Linear Pulse Code Modulation) with
a sampling rate at 48 KHz. Both Optical Fibre and Coaxial cables can be connected at the same time
while still providing a reliable and lossless audio signal transmission.
Specification

Input ports: 2 x Phono (Left & Right)

Output ports: 1 x TOSLink (Optical Fibre) & 1 x Coaxial

Integrated digital interpolator filter and Digital to Analogue Converter (DAC)

Supports uncompressed 2 channel LPCM digital audio signal output

Power Supply: 5VDC 1A

Dimensions: (WxDxH) 46 x 46 x 24mm

Housing: Plastic

Colour: White
English