Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
12 INSTALLATION
Dimensions and Clearances
• Check the dimensions of the appliance and the installation path to ensure there is sufficient room to
move the refrigerator through doors or narrow openings.
• If an opening is too narrow to fit the refrigerator through, remove the refrigerator doors. See Removing/
Assembling the Doors and Drawers in this manual.
• The installation location chosen for the refrigerator should allow space behind the unit for connections
and airflow and space in front to open the doors and drawers.
• Too small of a distance from adjacent items may result in lowered freezing capability and increased
electricity consumption charges. Allow at least 24 inches (610 mm) in front of the refrigerator to open the
doors, and at least 2 inches (50.8 mm) between the back of the refrigerator and the wall.
-
A
Depth without Handle
B
Width
C
Height to Top of Case
D
Height to Top of Hinge
E
Back Clearance
F
Depth without Door
G
Depth with Handle
H
Depth (Total with Freezer Drawer Open)
I
Depth (Total with Door Open 90°)
B
A
D
C
Dimension/Clearance
E
F
G
H
I
LMWS27626*
32 3/8˝ (822 mm)
35 3/4" (908 mm)
68 3/8" (1737 mm)
69 3/4" (1772 mm)
2" (50 mm)
28 1/2˝ (724 mm)
30 7/8˝ (886 mm)
54 3/4˝ (1391 mm)
47 1/8˝ (1197 mm)
LMWC23626*
28 5/8˝ (728 mm)
35 3/4" (908 mm)
68 3/8" (1737 mm)
69 3/4" (1772 mm)
2" (50 mm)
24 3/4˝ (630 mm)
31 1/4˝ (792 mm)
51˝ (1297 mm)
43 3/8˝ (1103 mm)
Publicité
Table des Matières
