Bluetooth Connectivity; Using The Appliance; Brushing Instructions - Philips sonicare HX6322/04 Mode D'emploi

English
12

Bluetooth connectivity

Before you start the connectivity procedure, make sure your mobile
device runs on Bluetooth 4.0 or higher.
Note: For the latest information on device compatibility, please
visit the App Store or Google Play.
Connecting your toothbrush
1 Download the Philips Sonicare For Kids app from the App Store or
Google Play.
2 Conirm Bluetooth is switched on on your mobile device before
you open the app. Check the settings on your mobile device to
turn on Bluetooth.
3 To connect the toothbrush to the app, turn on the toothbrush by
pressing either the power on/of button or the brushing mode
button. Make sure the toothbrush is not on the charger when you
turn it on.
4 Open the Philips Sonicare For Kids app.
5 Follow the app instructions displayed on your mobile device.
The app automatically connects with the toothbrush. If the
toothbrush does not connect, follow the troubleshooting steps
provided in the app.
6 Keep your mobile device close to your toothbrush when you use
your toothbrush. Make sure your mobile device is safe in a dry
place.

Using the appliance

Brushing instructions

1 Wet the bristles and apply a small amount of toothpaste.
2 Place the toothbrush bristles against the teeth at a slight angle
(45 degrees), where the teeth and the gumline meet. This is to
ensure that the whole tooth surface is brushed (Fig. 6).
35_020_9980_1_DFU-BS_A6_v1.indd 12 18/12/15 13:46