Technical Specifications - LENCO PMX-160BK Mode D'emploi

No power
•
Ensure that the mains cable is securely connected.
•
Ensure that the units power switch is set to on.
The remote control does not function
•
Use the remote control in a shorter distance to the unit.
•
Point the remote control at the remote control sensor on the unit.
•
Replace the batteries in the remote control with new ones.
•
Remove any obstacles between the remote control and the unit.
The unit does not respond when pressing any buttons.
•
Remove the batteries from the remote control and remove the powercord of the PMX-160 for a minute. Then reinsert the
batteries and replug the powercord
No sound output
•
Turn up the volume with VOL+ or turn the master volume knob clockwise: Do not forget that the master volume knob on the unit
sets the maximum volume output! The volume buttons on the remote control will adjust the volume up to the maximum volume
set by the master volume knob.
•
make sure that the [DJ MIXER] knob is turned in the desired direction A or B
I can't find the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing
•
Ensure that the unit is switched on.
•
Ensure that the Bluetooth function is activated on your Bluetooth device.
•
Ensure the BT player device is within 10 meters of your PMX-160
FM reception
•
Ensure the antenna wire is fully extended.
•
Electrical interference in your home can cause poor reception. Move the unit away from them (especially those with motors and
transformers).
The unit switches off automatically during play
•
Increase the volume level of your connected sound source (DVD player/TV etc.)
Sound interference coming from the speakers in Speakers
•
Move any wireless devices (mobile phone, bluetooth device etc.) away from the unit.

TECHNICAL SPECIFICATIONS

FM radio frequency range
Bluetooth frequency range
Transmitter output power
AC power input
Power consumption
Speaker output power
Bluetooth
Bluetooth version
Remote control battery (Included)
Mic in
Line in
USB device capacity support
Micro SD card capacity support
Dimension
Weight
• The specification presents only as a reference. The value of weight and size are approximation.
• Our product is improved ceaselessly and the specification and function may be changed without prior notice.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be
voided.
Trouble Shooting
87.5 - 108 MHz
2.402-2.480 GHz
Less than 10mW
100-240V~, 50/60Hz
40 W max
15 W x 2 + 30 W
x 2
V4.2
CR2025 x 1pcs
6.3mm jack x 2
3.5mm stereo jack x 1
32GB max. (FAT32)
32GB max. (FAT32)
175 (L) x 205 (D) x 915 (H) mm
6.4 kg
13