Maintenance
Problem
Items still wrinkled
after Wrinkle Prevent
(Wrinkle-Care, Wrinkle
Release).
Water drips from
the nozzle when
SteamCare starts.
Sprayed water is
not visible during
SteamCare.
Extended time.
If a problem persists, contact a local Samsung service center.
50 English
DV7700J-03170Q-05_EN-US.indd 50
• Small loads of 1 to 4 items work best.
• Load fewer items. Load similar-type items.
• Take out the items immediately after drying is complete.
• This is steam condensation. The dripping water will stop after
a short time.
• Sprayed water is difficult to see when the door is closed.
• Sensor Dry automatically senses the moisture in the load
and shuts the dryer off when the selected dryness level is
reached.
The drying time can change according to the type and amount
of laundry. See the cycle chart for reference.
Action
2015/11/3 11:28:11