Additional Safety Rules For Impact Drivers; Additional Instructions For Work With The Charger - SPARKY GUR 10.8Li HD Notice Originale

power tool before making any adjust-
ments, changing accessories, or storing
power tools. Such preventive safety meas-
ures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for misalign-
ment or binding of moving parts, break-
age of parts and any other condition that
may affect the power tool's operation. If
damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and tool
bits etc. in accordance with these in-
structions, taking into account the work-
ing conditions and the work to be per-
formed. Use of the power tool for operations
different from those intended could result in
a hazardous situation.
5. SERVICE
a) Have your power tool serviced by a quali-
fied repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
IV - Additional safety rules
for impact drivers
▪ Be aware that this tool is always in operating
condition, because it does not have to be
plugged into an electrical outlet. Always set the
trigger switch to the locked OFF position when
installing or removing the battery pack.
▪ Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
▪ Hold power tool by insulated gripping sur-
faces only, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting acces-
sory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could
give the operator an electric shock.
▪ The tool must be used only for its prescribed
Original instructions
pages-GUR 10,8Li.indd 5
purpose. Any use other than those mentioned
in this Manual will be considered a case of mi-
suse. The user and not the manufacturer shall
be liable for any damage or injury resulting from
such cases of misuse.
▪ To use this tool properly, you must observe the
safety regulations, the assembly instructions
and the operating instructions to be found in
this Manual. All persons who use and service
the machine have to be acquainted with this
Manual and must be informed about its poten-
tial hazards. Children and frail people must not
use this tool. Children should be supervised
at all times if they are in the area in which the
tool is being used. It is also imperative that you
observe the accident prevention regulations in
force in your area. The same applies for gene-
ral rules of occupational health and safety.
▪ The manufacturer shall not be liable for any
changes made to the tool nor for any damage
resulting from such changes.
▪ Even when the tool is used as prescribed it is
not possible to eliminate all residual risk factors.
The following hazards may arise in connection
with the tool's construction and design:
▪ Damage to hearing if effective ear defenders
are not worn.
V - Additional instructions
for work with the
charger
▪ Before using the charger, read all the instruc-
tions and cautionary markings on the charger
and battery pack as well as the instructions on
using the battery pack.
▪ Only charge your batteries indoors as the
charger is designed for indoor use only.
WARNING: If the battery pack is
cracked or damaged in any other way, do not
insert it in the charger. There is a danger of
electric shock.
WARNING: Do not allow any liquid to
come into contact with the charger. There is a
danger of electric shock.
▪ The charger is not intended for any use other
than charging the exact type of SPARKY re-
5
EN
4.11.2011 . 10:13:58 .