Oki MC360MFP Guide De Référence Pratique page 7

Walk-Up Operation
Copy / Scan / Fax (cont.)
For more information, see the
User's Guide on the CD provided
with your system or check with
your system administrator.
To Make Copies
Note
You can make a single copy of a
document, either from the ADF
or from on the glass, by pressing
the Start Color or Start Mono key
on the operator panel.
1. Load the document (see p. 6).
2. If prompted [Enter PIN], key in
your PIN number and press the
Enter key (
3. With [Copy] highlighted, press
the Enter key.
4. Set the number of copies (up to
99).
5. Make any other Copy settings*
on the display using the Up,
Down, Left and Right Arrow keys
and the Enter key.
6. Press the Start Color or Start
Mono key.
).
7
*Copy Mode Settings
100%
Letter
Mixed
Density : 0
Tray 1
Collate
1in1
EE
M.S-R
M.S-B
English
•
Reduce/Enlarge
Set the print media size
Set the print mode which
will provide the best
results for the type of
document you are
copying. For example, if
the document you are
scanning contains many
pictures, change this
setting to [Photo].
Set the print density
higher or lower.
Set the paper source.
Set to On or Off.
Set for multiple images
on one page (N-Up): 2 in
1, 4 in 1 horizontal, 4 in
1 vertical.
Edge Erase. Set amount
of document perimeter
to be erased.
Margin Shift Right. Set
the document image to
shift left or right.
Margin Shift Bottom. Set
the document image to
shift up or down.