Aspire Revvo Manuel D'utilisateur page 59

Using the Device
Changing the Atomizer Head
1. Screw the top unit counterclockwise from the clearomizer tank.
2. Loosen the funnel-shaped fastening screw and completely
unscrew it from the thread.
3. Remove the old head by lifting it over the filling tube.
4. Insert a new head. Please make sure that the head is correctly
placed and that it closes flush with the edge.
5. Fix it in place by reattaching the fastening screw.
6. To finish, reconnect the top unit to the clearomizer.
57