General Specifications
Display: Analog needle display with
mirror scale.
Operating Temperature: 0°C to 50°C, 0
to 70% Relative Humidity
Storage Temperature: -20°C to 60°C, 0
to 80% RH with battery removed
from meter
Power Supply (for resistance measure-
ment): one AA size 1.5V battery
Dimensions, with Holster (H x W x D):
5.1 x 2.6 x 1.65 inches, (13 x6.6 x
4.2cm)
Weight (including battery): 6.7 ounces
(176 grams)
Accessories: Test leads (attached),
holster, battery, and operator's
manual.
Safety: Meets EN61010-1 Cat II 300V;
EMC: Meets EN50081-1, EN50082-1
EMC: This product complies
with requirements of the
following European
Community Directives: 89/336/EEC
(Electromagnetic Compatibility) and
73/23/EEC (Low Voltage) as amended
by 93/68/EEC (CE Marking).
However, electrical noise or intense
electromagnetic fields in the vicinity of
the equipment may disturb the
measurement circuit. Measuring
instruments will also respond to
unwanted signals that may be present
within the measurement circuit. Users
should exercise care and take
D
Allgemeine Spezifikationen
Anzeige: Analoge Nadelanzeige mit
Spiegelskala
Betriebstemperatur: 0°C bis 50°C, 0
SPECIFICATIONS
appropriate precautions to avoid
misleading results when making
measurements in the presence of
electronic interference.
Electrical Specifications
Accuracies are indicated as ± % of full
scale values at 23°C ± 5°C, <75% RH.
DC Volts
Ranges: 2.5, 10, 50, 250, 500V
Accuracy, all Ranges: ±5%
Input Impedance: 2kΩ/V
AC Volts
wave inputs only
Ranges: 10, 50, 500V
Accuracy, all ranges: ±5%
Input Impedance: 2kΩ/V
DC Current
Ranges: 0.5, 10, 250 mA
Accuracy: ±5%
OL Protection: 200mA/250V glass fuse
Resistance
Ranges: 20kΩ, 2MΩ
Accuracy, all ranges: ±5%
Battery Test
Battery Voltages: 1.5V, 9V
Accuracy: ±10% of good/bad line
SPEZIFIKATIONEN
bis 70% Relative Feuchte
Lagertemperatur: -20°C bis 60°C, 0
bis 80% R.F., Batterie entfernt
Stromversorgung: eine AA 1.5V
Batterie (für Widerstandsmessung)
- 8 -
– Accuracies apply to sine