Wolf E Série Instructions D'installation page 6

W O L F
E S E R I E S
M O D E L S I C B S O 3 0 - 2 F / S A N D
I C B S O 3 0 - 2 U / S
IMPORTANT NOTE: A minimum 610 mm of
usable cabinet depth is required, or the back
panel of the cabinet may need to be removed
for proper installation. A minimum 635 mm of
usable cabinet depth is required for a flush
inset installation. The electrical box must be
flush with the back panel of the cabinet.
For ease of installation, Wolf recommends
using 838 mm wide cabinets with the E Series
single oven. A minimum 838 mm wide cabinet
is required for a flush inset installation. The
cabinet base platform must be able to support
113 kg.
Refer to the following illustrations for overall
dimensions, installation specifications and
electrical location for the E Series single oven.
The E Series single oven requires a separate,
grounded 3-wire 220-240 V AC, 50/60 Hz, 30
amp service with its own circuit breaker. Refer
to Electrical Requirements on page 16. The
oven is not supplied with an electrical plug.
O V E R A L L D I M E N S I O N S – M O D E L S I C B S O 3 0 - 2 F / S A N D I C B S O 3 0 - 2 U / S
Unframed Model ICBSO30-2U/S shown.
6
E S E R I E S B U I LT- I N OV E N S
B U I LT- I N S I N G L E OV E N S
25 mm
708 mm
759 mm 67 mm
IMPORTANT NOTE: Unless you are using
cabinets deeper than 610 mm for a standard
installation or 635 mm for a flush inset installa-
tion, it is recommended that the electrical
supply be placed in an adjacent cabinet.
Choose the location shown in the installation
illustrations on pages 8–9 that best suits your
installation.
RIGHT SIDE VIEW
CONDUIT
CHANNEL
687 mm
48 mm
603 mm
BEHIND FRAME
32 mm
TOP VIEW
48 mm
603 mm
718 mm
559 mm
OPEN OVEN DOOR
759 mm