Putting Into Operation - Kränzle K 1050 P Manuel D'utilisation Original

Putting into operation

Do not place high pressure cleaner on rough surface because unit tends to
vibrate during operation.
When carrying the high pressure cleaner, make sure to bear in mind the
weight of the machine, see technical data.
Neither set up or operate the K 1050 P in rooms where there is a risk of fire or
explosion nor put it into puddles. Do not use the machine under water.
If, none the less, the machine is operated in a hazardous area, the applicab-
le safety regulations are to be observed.
40
1. Carry high pressure cleaner to its place
of operation. When parking the unit
make sure that the four rubber buffers
stand on a safe support.
2. Unwind high pressure hose straight
and without nooses. (When using hose
extensions take care that the max. length
of 20 m is not exceeded!)