Time Setting; Alarm Setting; Snooze Function - LEXIBOOK WB100 Manuel D'instruction

1. In time display mode (default mode), press and hold the "MODE/SET/RESET" key
until "24hr" or "12hr" starts flashing.
2. Press the "MAX/MIN" key to toggle between the 12 hours or 24 hours mode, then
press "MODE/SET/RESET" to confirm and set the hour.
3. Press the "MAX/MIN" key to increase the values and adjust the hour. Then press
"MODE/SET/RESET" to confirm and set the minutes.
4. Press the "MAX/MIN" key to increase the values and adjust the minutes. Then
press "MODE/SET/RESET" to confirm the setting and go back to the time display
mode.
Note:
• The "MAX/MIN" key can only increases the values.
• During the setting process, if there is no input within 15 seconds, the unit will auto
matically go back to the time display mode.
Setting the alarm time
1. In time display mode, press the "MODE/SET/RESET" key once to enter the
"alarm" mode (the alarm icon
2. To set the alarm, press and hold "MODE/SET/RESET" until the hour's digits start
flashing.
3. Press the "MAX/MIN" key to increase the values and adjust the hour. Then press
"MODE/SET/RESET" to confirm and set the minutes.
4. Press the "MAX/MIN" key to increase the values and adjust the minutes. Then
press "MODE/SET/RESET" to confirm the setting and exit the alarm time setting
mode.
5. Press and hold the "SNZ/LIGHT/ALM" key to turn on or turn off the alarm. When
the alarm is turned on, the snooze icon
Note:
• The "MAX/MIN" key can only increase the values.
• The alarm must be turned on (
• When the alarm is turned on, the snooze icon
• The alarm will ring at the time set every day unless it is turned off.
• During the alarm setting process, if there is no input within 30 seconds, the unit will
automatically go back to the time display mode.

Snooze function

When the alarm is ringing, press on the base of the clock ("SNZ/LIGHT/ALM" rubber
feet) or on the "SNZ/LIGHT/ALM" key to temporarily turn off the alarm and use the
snooze function. The alarm will be repeated every 8 minutes until you turn it off.
8

Time setting

Alarm setting

is displayed on screen).
is displayed.
icon) or it will not ring at the specified hour.
is displayed in time display mode.
Copyright © Lexibook 2009 Copyright © Lexibook 2009
Turning
When th
the rubb
ring aga
Note: Th
Celsius
In time d
display i
Maximu
1. In tim
maxim
2. Press
3. Press
4. To cle
tempe
key.
Note: Th
Press on
backligh
Use the
clock to
Don't cle
chemica
guarante
from ext
unclear,
in airpor
WB100.
yourself
Copyright