Product Features; Getting Started - LEXIBOOK WB100 Manuel D'instruction

Image A
1. Hour
2. Maximum temperature icon
3. Snooze icon
4. Alarm icon
5. Minimum temperature icon
6. Temperature
7. Temperature icon
When you use the clock for the first time:
1. Open the battery door located under the unit.
2. Insert 2 x 1,5V
included) observing the polarity indicated at the bottom
of the battery compartment, and as per the diagram
shown opposite.
3. Close back the battery compartment. The hour and the
temperature will be displayed on the LCD screen.
Electronic candle
1. Using a screwdriver, open the battery compartment
located under the electronic candle.
2. Insert 2 x 1,5V
included) observing the polarity indicated at the bottom
of the battery compartment, and as per the diagram
shown opposite.
3. Close the battery compartment and tighten the screw.
Non-rechargeable batteries are not to be recharged. Rechargeable batteries are
to be removed from the product before being charged. Rechargeable batteries are
only to be charged under adult supervision. Different types of batteries or new and
used batteries are not to be mixed. Only batteries of the same or equivalent type as
recommended are to be used. Batteries are to be inserted with the correct polarity.
Exhausted batteries are to be removed from the product. The supply terminals are
not to be short circuited. Do not throw batteries into a fire. Remove the batteries if
you are not going to use the product for a long period of time.
WARNING: Mal-function or loss of memory may be caused by strong frequency
interference or electrostatic discharge. Should any abnormal function occur, remove
the batteries and insert them again.
Copyright © Lexibook 2009
ook 2009 ook 2009

Product features

Image B
1. "MAX/MIN" key
2. "°C / °F temperature display" key
3. "MODE/SET/RESET" key
4. "SNZ/LIGHT/ALM" key
5. "SNZ/LIGHT/ALM" rubber feet.

Getting started

LR03/AAA type batteries (not
LR03/AAA type batteries (not
7