Installation - Klarstein 3MC Mode D'emploi

INSTALLATION

1. Remove the appliance from the packaging.
2. Fold the stand out and place the appliance on a solid surface, such as a table.
3. Place the appliance approximately 20-60 cm from your eyes, the light must bathe
your face from the side.
Mains connection
• Connect the device only to sockets which correspond to the voltage of the device.
• Place the appliance near a wall outlet.
• Insert the plug firmly into the socket.
• Lay the power cord so that no one can trip over it.
Fastening of Daylight on the wall
There is a mounting hole on the back side of the appliance. At this mounting hole the
appliance can be fixed on the wall with screw. Depending on the type of wall, an
appropriate screw must be used, may be with pegs. The screw and the anchor are not
included in the scope of delivery.
Note: If the mounting hole or back housing is cracked or damaged. Do not fix the
appliance on the wall. Please contact customer service or the dealer for assistance.
EN
29