Audio Features - Clevo P170SM Guide Utilisateur Concis

Audio Features

You can configure the audio options on your computer
from the Sound control panel in Windows.
The volume may be adjusted by means of the Fn + F5/F6
key combination.
Volume Adjustment
The sound volume level can also be set using the volume
control within Windows. Click the Speaker icon in the
taskbar to check the setting .
30

Setup for 5.1 or 7.1 Surround Sound
To setup your system for 5.1 or 7.1 surround sound you
will need to connect the audio cables to the Headphone &
S/PDIF Combo jack, Line-In jack, Line-Out jack and Mi-
crophone-In jack (note: the Line-Out jack is used for 7.1
.
surround sound only)
1. Run Realtek Audio Console from the Windows Start menu.
2. Click Device advanced settings.
3. Plug the front speaker cables into the Headphone & S/PDIF
Combo jack.
4. Plug in the cables (you may require an adapter to connect each
cable to the appropriate jack e.g a stereo mini to dual RCA
adapter) from your speakers as follows:
• Headphone & S/PDIF Combo Jack = Front Speaker Out
• Line-In Jack = Rear Speaker Out
• Microphone-In Jack = Center/Subwoofer Speaker Out
• Line-Out Jack = Side Speaker Out (7.1 Surround Sound
only)
5. As you plug in each cable a dialog "Which device did you plug
in?" box will pop up.
6. Select the appropriate device from the drop-down menu
according to the speaker plugged-in (e.g. Rear Speaker Out),
and then click OK to save the setting.