Safety Notes; Applications - Monacor TVCCD-624 Mode D'emploi

13 Adapter with thread jack [thread 6.3 mm (
GB
camera installation; the adapter may be screwed to
the upper or lower side of the camera
14 for colour camera TVCCD-624(E)COL only:
rotary switch for adjusting the shutter time with func-
tion "ME" activated [switch (9g) set to "ME"], for the
8 adjusting options see table in chapter 7.1

2 Safety Notes

The camera corresponds to the directive for electromag-
netic compatibility 89/336/EEC.
The camera is suitable for indoor use only. For out-
side installation, the camera must be mounted into a
weatherproof outdoor housing.
Protect the camera against dripping water and splash
water, high air humidity, and heat (admissible
ambient temperature range 0 °C – 40 °C).
No liability for any damage will be accepted if the
camera is used for other purposes than originally
intended, if it is not correctly connected or operated
or not repaired in an expert way.
For cleaning only use a dry, soft cloth; never use
chemicals or water.
If the camera is to be put out of operation definitively,
take it to a local recycling plant for a disposal which is
not harmful to the environment.
12
1

3 Applications

/ ")] for
4
The B/W camera TVCCD-624(E) and the colour cam-
era TVCCD-624(E)COL are specially designed for use
in CCTV surveillance systems. In case of low illumina-
tion (night operation) the colour camera TVCCD-
624(E)COL is switched to B/W mode.
These high-resolution cameras are suitable for
infrared [the colour camera TVCCD-624(E)COL only
in B/W mode] and are equipped with extensive adju-
sting facilities, e. g. backlight compensation on/off,
automatic electronic shutter on/off, two alternatives for
AGC adjustment, etc. Models TVCCD-624E and
TVCCD-624ECOL are equipped with an Exview CCD
chip providing a particular high sensitivity to light (see
specifications).
For mounting the lens, the camera can be adjusted
to the C-mount or CS-mount mechanical focus setting.
It is possible to use either a lens with automatic lens
control [AI lens ("Auto Iris"), video signal controlled or
DC controlled] or a lens with manual iris control. A
4-pole connector plug for iris control of the camera is
supplied with the camera.