Virtual Garage - Meta Trak T.36 Pulsar Manuel D'utilisation

2.4 Virtual garage

36
The " " mode allows the user to
Virtual garage
create an area within which T.36 Pulsar can
move freely, without generating alarms.
An alarm message will be generated if the
device is located outside the set area.
The " " icon is shown in the main
Virtual garage
screen:
" " disabled.
Virtual garage
" " enabled.
Virtual garage
To access the "Virtual Garage" options, click
on the icon on the main screen.
The "Virtual Garage" menu allows you to se-
lect:
• the center of the area, starting from the
last position detected by T.36 Pulsar or
identifying a specific address,
• the width of the area by setting the radius
(value expressed in meters),
• insert a time after which the "Virtual Ga-
rage" mode is automatically deactivated,
• If a position is detected outside the "Vir-
tual Garage", the "Search Mode" starts
automatically.
Press the "ON" button to activate the "Virtual
Garage" mode.
Press the icon on the main screen and then
select "OFF" to manually disable the "Virtual
Garage" mode.
Pulsar Meta Trak Mobile App User Manual