Meta Trak T.36 Pulsar Manuel D'utilisation page 26

EN
Dear Customer,
thank you for choosing a Meta Trak system.
The T.36 Pulsar device can be placed on any object (car, motorcycles, goods,
buses, boats, special vehicles, bicycles, trailers, containers, etc.).
Locate T.36 Pulsar on a map and stay updated about the battery level of your
telematics device.
T.36 Pulsar, through daily wake-ups, connects to the GSM telephone network
to manage any requests that are sent to it by the Meta Trak Pulsar mobile app.
The daily wake-ups can be set from one to twenty-four per day.
It will then be able to respond to your commands by providing its location and
can activate or deactivate the search mode to allow you to locate T.36 Pulsar
in any case.
T.36 Pulsar can also provide its position autonomously, based on the functio-
nal settings from twice a week up to twenty-four times a day.
The reference time of the autonomous positions can be customized through
the settings of the Meta Trak Pulsar mobile app.
In search mode T.36 Pulsar sends its coordinates every minute.
This mode is to be used only in critical cases where it is necessary to con-
tinuously locate the device (e.g. vehicle theft) because this function quickly
reduces the battery life.
The user can also limit the search mode time from 1 hour to 24 hours. In this
way the user can avoid discharging the batteries if forgetting deactivate the
search mode.
Notifications will inform the user when the batteries need to be replaced or
when the T.36 Pulsar is located outside the «geo-fence area». The «geo-fence
area» can be set according to the user's needs.
See the history of events and positions received.
The Meta Trak Pulsar Mobile App can be customized!
The user can change the settings of the wake-ups, change the theme from
Light mode to Dark mode and enable/disable notifications.
Watch the Meta Trak Pulsar presentation video:
Manuale Utente App Meta Trak Pulsar
26