T-Fal 1816 Notice D'emploi page 4

3. Automatic steam
Place the Steam Control on AUTO (
The production of steam automatically adjusts to the temperature selected.
4. Variable steam
You can set the steam manually.
It is not advisable to use steam on silk or synthetics. This could
cause stains.
5. Anti-drip function
The supply of water is cut off automatically to avoid any drips from the
soleplate when the temperature of the iron is insufficient to produce
steam.When first using the iron, wait for 2 minutes for steam to be produced.
6. Vertical steam
1 Hang the garment up and hold the fabric taut.
2 Place the thermostat control on MAX.
3 Press repeatedly on the Burst of Steam button (
4 Hold the iron a few centimetres from the garment to avoid burning delicate fabrics.
1
7. Removing stubborn creases
1 Press repeatedly on the Spray button (
2 Or, use the Burst of Steam button (
pressing repeatedly to obtain a more powerful burst of
steam.
2
) (depending on the model)
(depending on the model)
(depending on the model)
AUTO
(depending on the model)
1
),
AUTO
) 2 and move the iron from top to bottom
2
) to dampen the fabric.
1
AUTO
AUTO
AUTO
AUTO
3
1
AUTO
2
+
3