Using The Washing Machine - Campomatic WD 950 E Mode D'emploi

MODEL: Campomatic WD 950 E
MAIN FUNCTIONS OF THE WASHING MACHINE
T
6KG
1200 A Class
RPM
Washing Efficiency
WASHER DRYER
A
The Easy Logic II system automatically reduces the wash time and water and power
consumption according to the amount of washing placed in the drum.
The washing machine will automatically programme a half-load or incomplete load wash cycle
without the need for any intervention.
(Follow these instructions and the washing machine will run the selected wash cycle)
1.
Open the door. Load the washing loosely in the drum without compacting it. (Items of different sizes
strengthen the washing action and are distributed better during spinning).
Warning: Do not overload the washing machine. It is not advisable to wash items that absorb
large quantities of water such as carpets.
2. Close the door using a light pressure. Check that none of the items have become trapped between
the door and the gasket.
3. Add a low-suds powder detergent and softener designed for automatic washing machines in the
respective compartments (see chapter "USE OF DETERGENTS).
4.
Close the detergent drawer. Do not open the drawer while the machine is working as this may
cause water to spill out.
5. Rotate the programmer knob (P) to select the programme and required temperature according to
the type of fabric to wash (see: "PROGRAMME TABLES"), then press the start button (L) and the
cycle will start.
N.B. When a programme is selected, the led indicating the recommended spin speed for the
programme will light up.
6.
If the spin speed selected by the washing machine does not meet with your needs, select the
required speed by pressing button (H). (see "VARIABLE SPIN").
7. Select the (C) buttons with the required functions (see "OPTIONAL FUNCTIONS").
8. Press button (I) if required (see "DELAYED START")
9. Press button (L) to start the wash cycle (see "START BUTTON")
10. On completion of the wash, rotate the programmer knob (P) to the "STOP" position,
11. With dry hands, unplug the washing machine from the mains supply.
12. Open the door and remove the washing.
13. Close the water feed valve.
S P
M
TURBOLOGIC WD950E
180' MAX
END
DRAIN SPIN
STOP
COTTONS
140' 800
1 H 2 H 4 H 8 H RINSES
90
120' 600
75
DRY
100' 500 60
COLD WASH 40
40'
ºC
DAILY WASH
40 30
QUICK 35
60
COLD 40
SILKS - WOOL
30 30
40
30 40
WOOL
DELICATES SYNTHETICS
MADE IN ITALY
H C I L

USING THE WASHING MACHINE

"EASY LOGIC" TECHNOLOGY
WASH CYCLE:
A Drier selection button
C
Optional function buttons
H
Spin selector button
I
Delayed start button
L Start button
M
Delay and wash progress indicator leds
P
Programme and temperature knob
S Spin speed indicator leds
T Drying time indicator led
7
GB