Using The Washing Machine - Campomatic WM850E Mode D'emploi

MODEL: WM850E WM850EB WM850ES
MAIN FUNCTIONS OF THE WASHING MACHINE

USING THE WASHING MACHINE

The electronic washing machine is fitted with an
automatically recognises the quantity of washing loaded. The machine can thus
regulate the amount of water to use for the wash and proportion the wash time
accordingly, thus saving water, time and energy.
In the case where the amount of washing is less than the maximum recommended
load (see technical characteristics table), the quantity of water used for the wash
will be reduced by 2 litres for each kg less of washing.
In the case of a half-load or less, the machine will automatically carry out one
rinse less than programmed.
N.B. The
WASH CYCLE:
(follow these instructions and the washing machine will run the selected wash cycle)
1. Open the door
2.
Load the washing in the drum and close the door.
Warning: Do not overload the machine. It is not advisable to wash items that absorb large
quantities of water such as carpets.
3. Add a low-suds detergent and softener designed for automatic washing machines in the respective
compar tments of the detergent drawer (see chapter "USE OF DETERGENTS").
4. Close the detergent drawer. Do not open the drawer while the machine is working as this may
cause water to spill out.
5. Rotate the programmer knob (P) to select the required programme and temperature according to
the type of fabric to wash (see: "PROGRAMME TABLES")
N.B.: When selecting a program, the led of maximum spin speed allowed by the program
selected will automatically light up. One of the leds (S) will light up to indicate the starting
wash cycle.
6. Select the required spin speed by pressing button (H) (see "VARIABLE SPIN").
7. Select the (C) buttons with the functions required (see "OPTIONAL FUNCTIONS").
8. Press button (I) if required (see "DELAYED START").
9. Press button (L) to start the wash cycle (see "START BUTTON").
10. At the end of the wash cycle, turn the program selector knob (P) on "STOP".
11. Open the door and remove the washing.
12. With dry hands, unplug the washing machine from the mains supply.
13. Close the water feed valve.
B D S
I H C L
"EASY LOGIC" TECHNOLOGY "EASY LOGIC" TECHNOLOGY
"EASY LOGIC" function is only active for cotton programmes.
"EASY LOGIC"
P
C Optional function buttons
D Spin speed indicator leds
B Delayed start led
H Spin selection button
I
Delayed start button
L Start button
P Programme and temperature knob
S Programme status led
"EASY LOGIC" system that
"EASY LOGIC"
5
GB