Control Panel; Replacing The Filters - Ayce KJ280F-H01 Mode D'emploi

CONTROL PANEL

Filter Reset Humidifier Timer
Filter Reset button
Sets the filter counter to zero.
Humidifier button
Turns the humidifier On and Off.
Timer button (for air purifier function only)
Seven operating intervals are selected sequentially and are indicated by the corresponding
lights: 1h - 2h - (1h+2h) - 4h - (1h+4h) - (1h+2h+4h).
Speed button
Manually sets the fan speed. The default is Low when the appliance is On.
Power button
Turns the purifier On and Off.
FILTERS
Filter Reset
1. The indicator light will blink when a filter needs to be replaced.
2. Fit the cleaned or new filters, and press the button for 3 seconds. The light stops blinking.
3. Within 3 seconds, press the button again for 3 seconds to reset the filter counter.
Speed ON/OFF
Low
Mid
High
Regular replacement
Part Period
Pre-filter Every month or as required
Composite filter 2000 hours
Filter life depends on usage and environment

REPLACING THE FILTERS

1. Unplug the air purifier.
2. Pull the front grille out through the grooves at both sides.
3. Remove the composite filter.
4. Replace the filters in the following order: new composite filter, cleaned pre-filter.
Front grille Pre-filter
Note: Spare filters are available in your JUMBO store (EAN 7613164378163).
34 35
Method
Rinse thoroughly in warm
water. Allow to dry before re-
installing.
Replace
Composite filter
(active carbon filter & HEPA filter)