Product Data - HEIDENHAIN VT 121 Mode D'emploi

Storage after removal
If the product is stored temporarily after removal, the
information on repackaging and the specified ambient
conditions must be complied with.
7.3 Disposal
Incorrect disposal of the device!
Incorrect disposal of the device can cause
environmental damage.
Do not dispose of electrical waste and
electronic components in domestic
waste
Forward the device to recycling in accor-
dance with the applicable local disposal
regulations
If you have any questions about the disposal of the
device, please contact a HEIDENHAIN service agency
HEIDENHAIN | VT 121 | Operating Instructions | 7/2020
NOTICE
8 Specifications
8.1 Overview
This chapter contains an overview of the product data
and drawings with the product dimensions and mating
dimensions.
8.2

Product data

Product
Housing Milled aluminum housing
Stainless steel base plate
Housing dimen- 98 mm x 74 mm x 84 mm
sions
Type of mounting Attached with two fixing clamps
(ID 329454-02)
Electrical data
Supply voltage DC 19.2 V to 30 V (typical: DC
24 V)
Input power: max. 8.7 W
Reverse-polarity protection
X101: 12-pin A-coded M12
flange socket (male)
47