Intended Use; Improper Use - HEIDENHAIN VT 121 Mode D'emploi

2 Safety
2.1 Overview
2.2 General safety precautions
General accepted safety precautions, in particular the
applicable precautions relating to the handling of live
electrical equipment, must be followed when operating
the system. Failure to observe these safety precautions
may result in personal injury or damage to the product.
It is understood that safety rules within individual
companies vary. If a conflict exists between the material
contained in these instructions and the rules of a
company using this system, the more stringent rules take
precedence.
32
2.3

Intended use

The VT series products are high-quality camera systems
for the inspection of tools inside a machine's working
space. The products are deployed for the documentation
of tool wear, tool breakage inspection, and visual control.
The products of this series
must only be used in commercial applications and in
an industrial environment
are intended for indoor use in an environment in which
the contamination caused by humidity, dirt, oil and
lubricants complies with the requirements of the spec-
ifications
must be mounted on a mounting surface to ensure the
correct and intended operation of the product
2.4

Improper use

In particular, the products of the VT 121 series must not
be used in the following applications:
Use and storage outside the operating conditions
specified in "Specifications"
Outdoor use
Use in potentially explosive atmospheres
Use as part of working-space monitoring
HEIDENHAIN | VT 121 | Operating Instructions | 7/2020