On/Off Switch - Einhell Global BM-G 650 E Mode D'emploi

Anleitung BM-G 650 E 24.07.2001 14:28 Uhr
A
B
Seite 7

On/Off switch:

To switch on: Press switch A
Continuous operation: Lock
switch A with locking button B
To switch off: Press switch A
briefly
The speed is varied by applying
more or less pressure on
switch A. You can preselect the
speed by turning the knurled
screw in switch A.
Push the slide switch to position
'hammer'. Do not move this
switch until the drill has
stopped!
Please note: This switch should
be in 'drill' position when drilling
holes in tiles.
Push the slide switch to position
'drill'. Do not move this switch
until the drill has stopped!
GB
7