Storage; Troubleshooting - Hoover TwinTank WH20200 Guide D'utilisation

„ Unplug the power cord.
„ Place steam cleaner in Cooling Tray and allow to cool.
„ Empty the residual water from the water tank and clean the external surface with a dry cloth. Allow
to dry.
„ Re-install water tank, replace in Cooling Tray to prevent damage to floor and store in upright position.
„ You may leave solution in solution tank for short period of time, but if you are going to leave solution in tank
for more than 2 weeks, it is recommended to empty the solution tank.
USE TROUBLESHOOTING GUIDE AS A FIRST STEP TO RESOLVE ANY PROBLEMS YOU MAY BE
EXPERIENCING.
If steam cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped
into water, call Customer Service at 1-800-944-9200 for further instruction before continuing use.
To reduce risk of personal injury - Unplug Steam Mop before servicing and allow to cool.
PRobleM Possible Cause
Steam Mop 1. Steam cleaner may not be plugged
into the electrical outlet correctly.
won't run
2. The electrical outlet may not be
working properly, check the fuse or
breaker, or consult an electrician.
3. The power cord may be damaged.
Steam mop 1.Water tank may be empty.
not producing
steam
2. The water tank may not be attached
correctly.
3. Water Filter may be clogged and
needs to be replaced.
4. Thermal protector may turn off pump
if trying to operate steam cleaner
before steam indicator is illuminated.
5. Steam path may be blocked.
Microfiber pad 1. The cleaning pad may already be
saturated with dirt and needs washing.
doesn't pick
up dirt

4. stoRaGe

5. tRoubleshootinG

WARNING
! !
Possible solution
1. Ensure the plug is pushed in securely.
2. Check fuse or breaker in home. Replace
fuse/reset breaker in home.
3. If cord is damaged have it replaced by
an authorized service representative.
1. Please refer to the "Filling Water Tank"
section - page 6.
2. Please refer to the "Filling Water Tank"
section - page 6, and ensure tank is fully
seated.
3. Check Water Filter and clean or replace.
4. Unplug steam cleaner and allow to cool
down
5. Please refer to the "Clearing Blockages"
section - page 12.
1. Wash or replace with clean pad. Please
refer to the "Microfiber Pad" section.
11