Head Support - Thomashilfen Harmony Defender Reha Mode D'emploi

Harmony Defender Reha – CAN Version – 2-in-1 CarSeat (supplement)
5-point belt
Please note: Booster Mode ONLY
The 5-point positioning belt integrated into the child seat is NOT a safety-relevant
item. In this case the child is restrained by the vehicle's 3-point safety belt. The
5-point belt is only intended for use as a positioning belt to provide additional sup-
port for children with a body weight between 18,1 and 50 kg/ 40 and 110 lbs and
body height between 86,.4 and 144,8 cm / 34 and 57 in.
WARNING: To ensure headrest is locked in position, gently push down on head rest.
Failure to adjust the harness straps correctly could result in serious injury or death.
Harness and Booster Mode: For more information on the use of belts please
consult the Harmony Defender user manual provided with the seat.
Loosen the harness strap by pushing the up-front metal harness adjuster at the front
of the seat just above the adjustment strap and simultaneously pull the chest strap
towards you. (Fig. 1a)
Tighten harness system by gently pulling on the up-front harness adjuster strap until
all slack is removed from the system.
Unbuckle harness straps by pressing on the red buckle release button and by pulling
the buckle clips out. (Fig.1b)

Head support

Pull the covers as tight as possible over the side parts of the headrest. (Fig. 2a + 2b)
The cover can be removed and maschine washed at up to 30° C / 86° F.
Lateral trunk support
Attach the lateral trunk support by placing it on the seat. (Fig. 3a) Guide both hook
and loop straps behind the back cover and hook and loop-fasten them behind the
cover. (Fig. 3b)
The pad can be removed and maschine washed at up to 30° C / 86° F.
14