Set Up And Assembly - CYBEX CP-21073 Mode D'emploi

NOTE: The monitor must be installed on a Cybex mounting bracket. See installation instructions received with Cybex
product.
1. Read and understand all instructions thoroughly before setting up the monitor.
NOTE: Each step number in the assembly instructions describes the step to be completed. The lettered steps following
each step number describe the procedure required. Do not continue with step 2 until have carefully read all of the
assembly instructions.
2. Unpack and verify the contents of the boxes.
A. Open the cardboard box containing the monitor.
B. Check to be sure that the following items are present. Check off each item as found. See Figure 1. If any of the
parts are missing contact Cybex Customer Service.
Ite
m Qty
A 1

 B 1
 C 2
 D 1
N/A means Not Applicable
Figure 1
5 – Set Up and Assembly
Part Number Description
CP-21073 Monitor, DVB-T and SECAM
CP-21531 Remote control
N/A Batteries, Remote control, AAA size
LT-21778 User's Manual
A
B
D
C
5-1