Emergency Switch - Global Industrial 988955 Manuel De L'utilisateur

4.4 Traveling
Rotate the throttle button in the direction you want to
travel. The farther you rotate the throttle button from
the neutral position, the faster the truck will travel.
Backward
4.5 Emergency Reverse Button
If you accidentally hit the reverse button while working, the
truck will stop and then move in the direction of the forks.
Be careful-the reverse button cannot prevent injuries.

4.6 Emergency Switch

Pushing down the emergency switch will cut the power
source of the machine, making it stop immediately.
4.7 Entering A Pallet
Follow these steps when entering a pallet with a truck:
1. Approach the pallet from either side with the nearest
fork about 3 in (76mm) out in the aisle.
2. When the fork is just forward of the pallet edge, stop.
3. Turn the control handle to swing the front of the truck
out into the aisle until the forks begin to enter the
pallet at an angle.
4. Continue maneuvering the truck, gradually returning
the control handle straight ahead until the truck faces
the pallet squarely.
5. Drive the truck forks-first until the pallet is completely on
the forks. Ensure that the load wheels are not resting on
any of the boards on the bottom of the pallet.
6. Lift the pallet just enough to raise it off the floor.
7. Change direction and carefully swing the truck out into
the aisle.
Powered Drive Straddle Trucks
Forward
Backward
6
User's Manual
Forward
Emergency
Reverse
Button
Press down
to cut off
power