Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Functions
This infrared thermometer is for measuring
- temperature at a person's forehead,
- surface temperature of objects and liquids,
- ambient temperatures.
The thermometer also offers additional functionalities:
- 9 memory locations for simple plotting of changes in temperature,
- date and time, also with all stored temperatures measured,
- optical and acoustic fever alarm at temperatures over 37,5°C,
- switchable to °C and °F.
Operation
Remove the protective cap and switch on the thermometer with the "
" button. After a short self-test and two short beep
tones, the thermometer is ready for forehead temperature measurement.
Setting time and date
With the thermometer switched on, hold the "
" button depressed for 5 seconds. As soon as the "SET" symbol appears in the display, you can
use the "SCAN" button to set in turn the 12 or 24 hour mode, hour, minute, year, month and day ("24" appears in the display for the 24-hour
mode). Confirm the values set in each case with the "
" button.
Batteries
The type 3V CR2032 battery is already fitted and depending on usage has a life of around 3000 measurements. When
the battery gets weak, the battery warning symbol appears
. It is still possible to measure the temperature. Battery
must be replaced. When the battery symbol flashes
, the battery must be exchanged by sliding the battery
compartment cover off to the rear. Remove the spent battery as shown in the adjacent picture. Insert a new battery of the
same type with the positive pole at the top. Close the battery compartment cover again.
35
Publicité
Table des Matières
