Télécharger Imprimer la page

Ercogener GenPro 400e Notice D'installation page 7

Masquer les pouces Voir aussi pour GenPro 400e:

Publicité

Les langues disponibles

Les langues disponibles

Description
Casing dimensions
- Length: 73 mm
Mounting
Power Supply
µ-Fit 4 pts
Sub D-HD 15 pts
RS232
Mini USB
USB port
using the modem
Connect GSM antenna MAIN (SMA-F). Recommended P/N. 636Z232160
Option: connect GSM antenna AUX (SMA-F). Recommended P/N. 636Z232160
MIMO for LTE
Diversity for 3G
Install the USB drivers for the modem.
Connect serial link (PC)
subD-HD 15 pin / subD 9 pin cable. ercogener P/N. 4404000206.
or
USB cable (see data consumption warning, in User Guide)
Insert SIM card
Remove the SIM cover.
Insert the SIM card (push / push system) mini-SIM (2FF) card 3V
(see diagram)
Place the SIM cover back
Connect the 4 pin 2 wires cable, switch ON the GenPro 400e
Power range :
Black wire :
information refer to the documentation available on our website
www.ercogener.com
Inverser le pliage pour la version française.
The information and non contractual pictures in this document are given for indication purposes
only. ercogener SAS reserves the right to modify its products and documentation at any time.
EG_GenPro400e_1103_IS_000
Width: 54 mm
7.2 to 32 V
Red wire :
GenPro 400e
DC
+V
DC
GND
For all configuration and cabling
Depth: 25 mm
GSM antenna
SMA-F—MAIN
Activity led GSM
GSM antenna
SMA-F—AUX
or 1.8V
DC
Dct_425_01
mini-SIM
Micro-SIM
nano-SIM
DC

Publicité

loading