Tuning - Nordmende 20 TFT LCD Mode D'emploi

AVL
AVL is used for Automatic Volume Level. If it is on then sound volume is adjusted automatically.
In case of distorted Audio due to high audio modulation index, make AVL On in sound menu.
1. Use [CH+] / [CH-] keys on remote or on TV set to select AVL parameter in Sound menu
2. Press [VOL+] / [VOL-]keys on remote or on TV set to switch it On or Off.
3. Press the [ MENU ] key to confirm. Press the [ MENU ] key to exit.
SURROUND
1. Press [CH+] / [CH-] keys on remote or TV set to select Surround effect.
2. With [VOL+] / [VOL-]keys on remote or on TV to switch it ON or OFF.
3. Press the [ MENU ] key to confirm. Press the [ MENU ] key to exit.
6.

TUNING

The LCD television has an automatic search system which tunes and stores all available channels
automatically. Also channels can be tuned manually, it is only necessary in case of new broadcast or a
channel is not stored in Auto Search and you do not want to change the individual order of preset
stations
Select the TUNING menu by pressing MENU & [CH+] / [CH-] keys on remote or on TV set.
Press VOL+ key on remote or V+ key on TV set, [CH+] / [CH-] keys on remote or on TV set to select
sub items in TUNING menu.
COUNTRY
By selecting Country, TV set will automatically adjust colour and sound system
corresponding to that country.
1. Press [CH+] / [CH-] keys on remote or TV set to select Country parameter in Tuning
menu.
2. Press [VOL+] / [VOL-]on remote or on TV set to keys select Country
3. Press the [ MENU ] key to confirm. Press the [ MENU ] key to exit
AUTO SEARCH
1. Press [CH+] / [CH-] keys on remote or on TV set to select Auto Search parameter in
Tuner menu.
2. Press [VOL+] / [VOL-]keys on remote or on TV set to start Auto Search.
3. Wait until function has finished.
4. Press [MENU] key on remote or on TV set to stop Auto Search.
MANUAL TUNE
Function: Manual Tune for Antenna input.
1. Press [CH+] / [CH-] keys on remote or TV set to select Manual Search menu.
2. Press [VOL+] / [VOL-]on remote or on TV set to keys to start Manual Search.
3. Press the [ MENU ] key to stop Manual search. Press the [ MENU ] key to exit
FINE TUNE
Select the channel to be Fine Tune with [CH+] / [CH-] keys on remote or on set.
1. Select the Tuning menu by pressing the MENU and [CH+] / [CH-] keys on remote or on TV set.
2. Press [VOL+] / [VOL-]and [CH+] / [CH-] keys on remote or on TV set to select Fine Tune function.
3. Press [VOL+] / [VOL-]keys on remote or on TV set to Fine Tune the channel.
4. Press the [ MENU ] key to confirm. Press the [ MENU ] key to exit
TUNING PROG
1. Select the TUNING MENU by pressing the MENU and [CH+] / [CH-] keys on remote or on TV set.
2. Press [VOL+] / [VOL-]and [CH+] / [CH-] keys on remote or on TV set to select Tuning Prog function.
3. Press [VOL+] / [VOL-]keys on remote or on TV set to enter in Tuning prog sub menu.
Prog Num This indicates current program number.
You can adjust Program number by VOL+ / VOL– keys or by numeric keys on
remote or V+/V- keys on TV set.
Skip You can skip unwanted channels in this menu ,skipped channels will not be
selected with [CH+] / [CH-] keys on remote or on TV set but skipped channels can be
selected by pressing skipped program number by direct digit number selection keys on
remote.
The skipped channel number is displayed in red colour.
Press [VOL+] / [VOL-]keys on remote or on TV set to switch SKIP to ON/OFF.
GB
23