Picture; Audio - Nordmende 20 TFT LCD Mode D'emploi

VOLUME CONTROL (V + / V- )
Increase volume / decreases Volume
Select submenu when menu is displayed
Increases / decrease value of selected item, select submenu items
Executes menu and submenu item selection.
- Selects characters of channel name , select hours & minutes in timer menu.
- Adjust settings of selected item
- Adjust channel number in Tuning, Exchange, Timer menu.
- Adjust feaures to ON/OFF.
MUTE
Turns sound OFF or ON.
Press [MUTE] again, or Volume Up [V+], and sound Volume will return.
SLEEP
Set sleep timer. Maximum time can be set 120 minutes in steps of 5 minutes.
NOTE:
Sleep Timer is deactivated when set is switch to stand by or mains power supply is switched Off.
4.

PICTURE

Select the PICTURE menu by pressing MENU & [CH+] / [CH-] keys on remote or on TV set.
Press VOL+ key on remote or V+ key on TV set, [CH+] / [CH-] keys on remote or on TV set to select
sub items in PICTURE menu.
BRIGHTNESS, CONTRAST, TINT, COLOUR, SHARPNESS
1. Press [CH+] / [CH-] keys on remote or on TV set to select Brightness, Contrast, Tint, Colour,
Sharpness.
2. Press [VOL+] / [VOL-]keys on remote or on TV set to adjust the Brightness, Contrast, Colour,
Sharpness.
3. Press [VOL+] / [VOL-]keys on remote or on TV set to adjust these parameter.
4. Press the [ MENU ] key to confirm your choice. Press the [ MENU ] key to exit.
NOTE:
TINT is available only for NTSC
This function is to adjust tint of picture for NTSC signal
COLOUR TEMP.
Colour Temperature adjust the colour temperature of the picture to Standard, Warm (reddish) or Cool
(bluish).
1. Press [CH+] / [CH-] keys on remote or TV set to select Colour Temp. Parameter in picture menu
2. Press VOL+ /VOL- keys on remote or TV set to set the colour temperature to Warm , Standard or
Cool.
3.
Press the [ MENU ] key to confirm your choice. Press the [ MENU ] key to exit.
5.

AUDIO

Select the AUDIO menu by pressing MENU & [CH+] / [CH-] keys on remote or on TV set.
Press VOL+ key on remote or V+ key on TV set, [CH+] / [CH-] keys on remote or on TV set to select
sub items in AUDIO menu.
VOLUME, BASS, TREBLE, BALANCE
1. Press [CH+] / [CH-] keys on remote or TV set to select Volume, Bass, Treble or Balance parameter
in Sound menu,
2. With [VOL+] / [VOL-]keys on remote or on TV set to adjust Balance(-50 to +50) and Volume, Bass,
Treble from (0-100).
3. Press the [ MENU ] key to confirm. Press the [ MENU ] key to exit.
GB
22