Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

STORING UNIT
SHORT TERM (1-6 months):
1. Add fuel conditioner & stabilizer at the specified
concentration.
2. Run the unit for two (2) minutes to ensure the mixed
fuel is in the entire fuel system. Close the fuel valve
and run the unit until it stops.
3. For Gasoline Engines: Remove the spark plug, pour
1-2 teaspoons (5-10cc) of engine oil into the cylinder,
slowly pull the starter handle 2 or 3 times, reinstall the
spark plug and tighten
4. Clean the exterior surface of the unit and apply a rust
inhibitor.
5. Store the unit in a dry, well ventilated place.
LONG TERM (More than 6 months):
1. Add fuel conditioner & stabilizer at the specified
concentration.
2. Run the unit until the fuel tank and carburetor
are dry. As the engine is beginning to die, move the
choke lever to the choke position.
NOTE: Turn off the idle control to decrease the run time.
3. For Gasoline Engines: Remove the spark plug, pour
1-2 teaspoons (5-10cc) of engine oil into the cylinder,
slowly pull the starter handle 2 or 3 times, reinstall the
spark plug and tighten
4. Clean the exterior surface of the unit and apply a rust
inhibitor.
5. Store the unit in a dry, well ventilated place.
WARNING: FUEL SHOULD BE DRAINED IN A
WELL VENTILATED AREA AND STORED
IN AN APPROVED CONTAINER.
Operator's Manual

Storage

Service
securely.
securely.
29

Publicité

Table des Matières
loading

Produits Connexes pour Mi-T-M Corporation AG2-PH13-08M1

Table des Matières