Before Returning For Repairs; Accessories - Schumacher Electric SJ1328 Guide D'utilisation

PROBLEM
The jump starter won't
power my 12V device.
The battery in the jump
starter won't hold a
charge.

10. BEFORE RETURNING FOR REPAIRS

For REPAIR OR RETURN, contact Customer Service at 1-800-621-5485.
DO NOT SHIP UNIT until you receive a RETURN MERCHANDISE AUTHORIZATION
(RMA) number from Customer Service at Schumacher Electric Corporation.
11. SPECIFICATIONS
Internal battery type .......................................... Sealed, maintenance-free AGM lead-acid
Nominal voltage ......................................................................................................12V DC
12V DC power output.................................................................................................... 15A
Capacity ......................................................................................................................18Ah
Peak Amps .................................................................................................................. 1100
Cranking Amps.............................................................................................................. 370
Battery Hookup Cables .....................................................................6 AWG, 30˝ (76.2 cm)
Dimensions (H x W x D).........................11" x 12" x 3.5" (27.94 cm x 30.48 cm x 8.89 cm)
Weight .................................................................................................... 15.3. lbs (6.94 kg)

12. ACCESSORIES

Male-to-male accessory cable ............................................................................ 94500109
POSSIBLE CAUSE
The 12V device is not turned on.
The jump starter's battery is not
charged.
The 12V device draws more
than 15A or has a short circuit.
The battery is bad (will not
accept a charge).
If these solutions do not eliminate the problem,
or for more information about troubleshooting,
contact customer service for assistance:
services@schumacherelectric.com
www.batterychargers.com
or call 1-800-621-5485
Monday-Friday 7:00
Turn on the 12V device.
Check the battery charge status
by pressing the Battery Status
button.
Disconnect the 12V device.
The internal breaker will
automatically reset after a
minute or two. Try the 12V
device again.
Replace the battery.
to 5:00 CST
am pm
• 9 •
SOLUTION