Troubleshooting; Troubles And Solutions; Specifications - Sony KD-65X70xx Guide De Référence

Troubleshooting

When the LED indicator is flashing red, count
how many times it flashes (interval time is
three seconds).
If the LED indicator flashes red, reset the TV by
disconnecting the mains lead from the TV for
two minutes, then turn on the TV.
If the problem persists, contact your dealer or
Sony service centre with the number of times
the LED indicator flashes red (interval time is
three seconds). Press  on the TV to turn it off,
disconnect the mains lead, and inform your
dealer or Sony service centre.

Troubles and Solutions

No picture (screen is dark) and no sound
• Check the antenna (aerial)/cable connection.
• Connect the TV to the mains socket, and press 
on the TV or the remote control.
Picture contours are distorted
• Change the current setting of [Film Mode]* to
other settings.
The TV turns off automatically (the TV enters
standby mode)
• Check if the [Sleep Timer]* is activated.
• Check if the [Duration]* is activated by [On Timer]*
or [Photo Frame Settings]*.
• Check if the [Idle TV Standby]* is activated.
Some input sources cannot be selected
• Select [AV Preset]* and select [Always]* of the
input source.
Some programmes cannot be tuned
• Check the antenna (aerial)/cable connection.
The remote control does not function
• Replace the batteries.
The TV surrounds become warm
• When the TV is used for an extended period, the
TV surrounds become warm. You may feel hot
when touching there by the hand.
* For more detailed information, press HOME on the
remote control, then select [Help Guide] under
[Settings] menu.
10
GB

Specifications

System
Panel system
LCD (Liquid Crystal Display) Panel, LED Backlight
TV system
Depending on your country/area selection/TV model
Analogue: B/G, D/K, I
Digital: DVB-T/DVB-C
1
DVB-T2*
1
Satellite* : DVB-S/DVB-S2
Colour/video system
Analogue: PAL/SECAM/NTSC3.58 (Video only)/NTSC4.43 (Video
only)
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L5.0,
H.265/HEVC MP/Main10@L5.1 (4K 60fps)
Channel coverage
Depending on your country/area selection/TV model
Analogue: UHF/VHF/Cable
Digital: UHF/VHF/Cable
1
Satellite* : IF Frequency 950-2,150 MHz
Sound output
10 W + 10 W
Wireless technology
Protocol IEEE 802.11b/g/n
Frequency band(s)
Wireless LAN (IEEE 802.11b/g/n)
Frequency range
2400-2483.5 MHz
Input/Output jacks
Antenna (aerial)/cable
75 ohm external terminal for VHF/UHF
1
Satellite antenna*
Female F Type Connector, 75 ohm.
DiSEqC 1.0, LNB 13 V/18 V & 22 kHz tone, Single Cable
Distribution EN50494.
/ AV IN
Video/Audio input (phono jacks)
HDMI IN 1/2/3 (support 4K resolution, HDCP
2
2.3-compatible)*
Video:
4096 × 2160p (24, 50, 60 Hz), 3840 × 2160p (24, 25, 30, 50,
60 Hz), 1080p (30, 50, 60 Hz), 1080/24p, 1080i (50, 60 Hz),
720p (30, 50, 60 Hz), 720/24p, 576p, 576i, 480p, 480i
Audio:
Two channel linear PCM: 32/44.1/48 kHz 16/20/24 bits, Dolby
Audio, DTS
ARC (Audio Return Channel) (HDMI IN 3 only)
Two channel linear PCM: 48 kHz 16 bits, Dolby Audio, DTS
DIGITAL AUDIO OUT (OPTICAL)
Digital optical jack (Two channel linear PCM: 48 kHz 16 bits,
Dolby Audio, DTS)
AUDIO OUT / (Stereo mini jack)
Headphone, Audio output, Subwoofer
1, 2, 3 (HDD REC) (Function not available in
Italy)
USB port 1, 2 and 3 support High Speed USB (USB 2.0)
CAM (Conditional Access Module) slot
DC IN 19.5 V (models with supplied mains adaptor
only)
Mains adaptor input
LAN
10BASE-T/100BASE-TX connector (Depending on the operating
environment of the network, connection speed may differ. The
communication rate and quality are not guaranteed.)
Output Power
< 20.0 dBm