iwc 3717 Mode D'emploi page 27

Adjusting the metal bracelet
If you have decided on a metal bracelet, you can easily
adjust it to the size of your wrist. You can make this
adjustment yourself by removing or adding individual
bracelet links.
Taking the bracelet apart and removing
individual links
bracelet (3). The metal bracelet is now separated, and
you can adjust the length of the bracelet by removing or
adding individual links. Note that only the bracelet links
in the area of the clasp can be separated, and the mark-
ing on the securing pin is provided to help you.
Open the push-button release safety
clasp by pressing the button on the
side. Lay the bracelet with its top sur-
face on a firm base. Using the special
tools provided, you can now push
down the securing pin (1) at the de-
sired point of separation and, at the
same time, displace the unmarked
pivot pin laterally by about 3 mm (2)
with the second special tool. Now
pull the protruding pivot pin from the
24 | 25