Renkforce DL-PAR103 Mode D'emploi page 36

Setting the DMX start address and the DMX mode
• Select DMX operation (display A001-A512) with the button MODE.
• Select the desired start address A001-A512 with the UP and DOWN buttons.
• Push the button SET UP.
• Select DMX mode (Ch1-Ch8) with the buttons UP and DOWN.
The display automatically switches back to address settings after a few seconds.
8 different DMX modes can be chosen. The following tables provide information about the effects of the
settings on the individual DMX channels.
DMX- Mode Ch1: COLOUR MACROS, see Table 1 for the colour
DMX Mode Ch2
DMX Channel
Channel Value
CH1 COLOUR MACROS, see Table 1 for the colour
CH2 0-255
DMX- Mode Ch3
DMX Channel
Channel Value
COLOUR MACROS, see Table 1 for the colour
CH1
Effect speed from slow to fast
0-11
CH2
12-255
CH3 0-255
DMX- Mode Ch4
DMX Channel
Channel Value
CH1 0-255
CH2 0-255
CH3 0-255
CH4 0-255
36
Function
Overall brightness setting 0% - 100%
Function
see Function CH1
see Table 2
Overall brightness setting 0% - 100%
Function
Red 0% - 100%
Green 0% - 100%
Blue 0% - 100%
Amber 0% - 100%
Note
Master brightness control
Note
CH2 value from 0-11
CH2 value from 12-255
Master brightness control
Note