Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Technical features
Drivers:
1 active (1) 26cm (10')long course
1passive (2) 26cm (10') long course and extra mass
Inputs:
2 line inputs
2 speakers inputs
Outputs:
2line outputs
Control:
Electronic control (3)
Crossover:
Active crossover with variable cut off frequency and 24dB/Oct slope (4)
Phase:
0° or 180°
Cabinet:
25mm thick closed cabinet
Amplifier :
2000W RMS - 350W peak
Frequency range:
26 to 180 Hz
Specific features:
Wireless, remote control
Size:
30cmx35cmx39cm (lxhxp) (12'x14'x16' lxhxd)
Weight:
15,750Kg (35lbs)
Power supply:
120V, 60Hz - 230V, 50Hz
Fuse:
230V - T1.6AL/250V
120V - T3.2AL/250V
NOTES
(1) Driver with a diaphragm activated by an electromagnetic load. The movement is proportional to the electric signal generated by the
amplifier.
(2) Driver with a diaphragm linked to an additional mass with no magnet. The movement is created by coupling with the active driver.
(3) Device that automatically and progressively limits the amplifier's output to avoid any saturation problem.
(4) The frequency cut off slope of a crossover is the level at which the frequencies will decrease above the cut off frequency. 24dB/ octave
means that, if the cut off frequency level is set to 80Hz, the160Hz Frequency will be 24dBs lower.
17
GB
Publicité
Table des Matières
