Boneco H400 Mode D'emploi page 44

44
NOTES ON OPER ATION AND TROUBLESHOOTING
en
Problem
Air has an unpleasant odor
AUTO LED on the appliance flashes red
Appliance cannot be operated in the app. The
message "Searching ..."
"Cannot be found" appears
AUTO LED pulses
Current display flashes if operation is attempted
Display remains dark
Possible cause
Stagnant water in the water base
The water base is empty
Appliance is blocked by another smartphone
The desired humidity has been reached or exceeded
Operation is blocked
The brightness of the LEDs has been heavily reduced in the app Increase the brightness of the LEDs in the app
Action
Drain the water base and clean the appliance and the AW200 evaporator mat
Fill the water base
Close the app on the second smartphone
None needed
Disable the LOCK function in the app