Technical Description; Display Levels - QUNDiS RNN5 Notice D'utilisation

Technical description

be combined with one another in a network.
Components Q node 5.5
The network node Q node 5.5 is made up of the following components:
Memory
500 measuring devices
Backup battery
Transmitter and receiver are used for recording the data from con-
sumption metering devices and forwarding these to other network
nodes in the same network. The data memory contains the meas-
uring data from the consumption metering devices. It is protected
(*)
face for readout purposes.
Keys
The network node has 3 keys with the following functions:
ing faults.

Display levels

Current
-
A
and network number
Number of Q node 5.5 in the network
C Number of consumption metering devices in
the network
D Remaining capacity of the main battery of the
Q node 5.5 in percent
E
V1.0 / 31.01.2019
Operating and Installation Instructions Q node 5 - en
Parts and operating elements
M-Bus
IrDA
RS232 (*)
-
-
-
Display levels
F Compatibility
Compatibility
Pure Q node 5.5 - system
•
•
Mixing systems Q node 5.5 - Q node 5*
• reception of C-Mode metering devices not possible
Mixing plants Q node 5.5 - WTT16
• reception of C-Mode metering devices not possible
*Q node 5
a Q node 5.5.
FUM5-00AM-DES-N5550
Extension module
13
15
DC 3.6 V at pos. 3
Q AMR S-Mode and Q AMR C-Mode sup-
variable displays
=
from QUNDIS possible