OPERATING INSTRUCTIONS
Ignition and adjustment
1
2
3
control knob
Use
error
good
1. zone indication / 0 position
2. high setting
3. low setting
Each burner is fully adjustable between high and low settings.
• Press the control knob and turn it anticlockwise. The burner will
ignite.
• Press the control knob fully for at least 3 seconds between high
(2) and low (3) settings. The thermocouple safety pilot has been
activated.
Pans
• Always ensure that the flames remain under the pan.
A lot of energy is lost if flames burn around the pan. The handles
may also become too hot.
• Do not use pans with a base diameter smaller than 12 cm. Smaller
pans are not as stable.
Pan support
Place the pan supports vertically, without sliding over the drip tray.
Position the pan supports on the drip tray in the correct way.
EN 5